kitsworld Model Decals & Photo Etch for the Modelling Enthusiast

Click to enlarge

Kitsworld -1:32 Scale Boeing B-17F Flying Fortress
£10.20

Boeing Flying Fortress B-17F-27-BO 'Knock-out Dropper' 359BS 303BG.

KW132089 Designed for the Hong Kong HKM01E05. HKM01E29 Boeing B-17F Flying Fortress.

Application Instructions and History

'Knock-out Dropper', a B-17F-27-BO, S/N 4124605, from the 303rd BG 'Hell's Angels', 359th BS, based at Molesworth, 1943 (Piloted by Lt. John P. Manning on it's 50th mission).

Knock-out Dropper was the first Eighth Air Force B-17 to complete both 50 (on 16th November 1943) and 75 combat missions (on 27th March 1944). It was scrapped at Stillwater, Oklahoma in July 1945.
Application Instructions

Kitsworld Water-slide Decals are printed on the highest quality decal paper, made up of a water-soluble adhesive and printed on a light blue backing paper.

How to Apply Water-slide Decals.
1). Cut around the decal.
2). Using the tweezers, pick up the decal and put it on the surface of the water - it may curl or sink, but this is normal.
3). Take the decal from the water and place it on a paper towel allowing any excess moisture to drain.
4). If using decal solutions then paint the first decal solution onto the scale model, at the point where you intend to stick the decal.
5). Use a paint brush or tweezers to pick up the decal and place it onto the surface.
6). Once the decal is in position dab a clean paper towel on the decal to soak up any left over water.
7). Leave the decal to dry, once completely dry a thin layer of gloss or matte varnish can be applied.

Stock code: KW132089

Back