decal sheets and 3-D decals

decal sheets and 3-D decals
Found: 3 items      On view 1 - 3           List View        Gallery View    
Kitsworld Kitsworld -1:35 British Military
Click to enlarge
Kitsworld -1:35 British Military
  £14.99

KW3D135005 British Army Webbing – P37 Pattern Blanco No.61 Buff (Bren & SMLE).
British Army Webbing - P37 Pattern Blanco No.61 Buff (Bren & SMLE).

KW3D135005, KW3D135006, KW3D135007- British Army Personal Equipment- Enlisted men & other ranks

** Note that straps have deliberately been made over length to allow for the differences in component dimensions in various kits and figure sets. It is recommended that a thin piece of masking tape is used in order to ascertain the required length of items marked 'cut to'. It is also recommended to study reference photographs closely to note the position of each item.

1. P37 web belt- cut to length required at non-buckled end.
1b. P37 web belt sizing hooks.
1c. P37 web belt sizing hooks.
1d. P37 web belt closing buckles.
1e. P37 web belt strengthening loops.
1f. P37 web belt web attachment straps.
2. P37 shoulder straps. Cut to length required.
2b. P37 shoulder strap brass ends.
3. P37 Lee Enfield (SMLE) sling. Cut to length required.
3b. P37 Lee Enfield (SMLE) sling attachment buckles.
4. P37 basic pouch- outer face.
4b. P37 basic pouch- inner face.
4c. P37 basic pouch- mounting strap.
5. P37 small haversack- outer face. Attach to smooth face of #5b.
5b. P37 small haversack- inner face. Attach to smooth face of #5.
5c. P37 small haversack- web attachment straps.
5d. P37 small haversack- auxiliary side and lower straps.
6. P37 pouch for .38 or .455 pistol ammunition- inner face. Attach to smooth face of #6b.
6b. P37 pouch for .38 or .455 pistol ammunition- outer face. Attach to smooth face of #6.
7. P37 pouches for .303 ammunition- outer face. Attach to smooth face of #7b.
7b. P37 pouches for .303 ammunition- inner face. Attach to smooth face of #7.
7c. Attachment buckle for P37 .303 ammunition pouches.
8. P37 'L' strap (vertical strap)- for large and small haversack- right side. Cut to length required.
8b. P37 'L' strap (vertical strap)- for large and small haversack- left side. Cut to length required.
8c. P37 'L' strap (vertical strap) adjustment buckle.
8d. P37 'L' strap (horizontal strap). Cut to length required.
8e. P37 'L' strap (horizontal strap) end piece.
9. P37 entrenching tool holder- outer face. Attach to smooth face of #9b.
9b. P37 entrenching tool holder- inner face. Attach to smooth face of #9.
9c. P37 entrenching tool helve attachment straps. Loop around helve.
9d. P37 entrenching tool helve attachment strap.
9e. P37 entrenching tool holder web mounting straps.
10. Mk.I/Mk.II 'Brodie' helmet sacking cover.
11. P37 brace attachments- one-piece gate.
11b. P37 brace attachments- hinged gate.
12. Mk.VI respirator case- outer face. Attach to smooth face of #12b.
12b. Mk.VI respirator case- inner face. Attach to smooth face of #12.
12c. Mk.VI respirator case- sling attachments.
12d. Mk.VI respirator case sling. Cut to length required.
12e. Mk.VI respirator case sling adjustment buckles.
12f. Mk.VI respirator case sling adjustment buckles with eye to attach breather tube hook.
13. P37 large haversack- outer face. Attach to smooth face of #13b. Note that only two of these are included as they were rarely carried.
13b. P37 large haversack- inner face. Attach to smooth face of #13.
13c. P37 large haversack web attachment straps.
13d. P37 large haversack underside attachment straps.
14. P37 canteen shoulder sling. Cut to length required.
14b. P37 canteen carrying strap. Cut to length required.
14c. P37 canteen shoulder sling to carrying strap buckles.
14d. P37 canteen securing strap (vertical). Cut to length required.
14e. P37 canteen securing strap (horizontal). Cut to length required.
15. British Army other rank insignia- NCO's: Lance-Corporal, Corporal, Sergeant, Staff/Colour Sergeant, Warrant Officer Class 2 (WO2), Warrant Officer Class 1 (WO1).
16. Chin straps for Mk.I/Mk.II 'Brodie' helmet (open). Cut each strap to length required.
16b. Chin strap for Mk.I/Mk.II 'Brodie' helmet (closed). Cut to length required.
17. Mk.V respirator case- outer face. Attach to smooth face of #17b.
17b. Mk.V respirator case inner face. Attach to smooth face of #17.
17c. Mk.V respirator case sling attachments.
17d. Mk.V respirator case retaining whipcord attachment loops. Use with #17h.
17e. Mk.V respirator case sling adjustment buckles with eye to attach breather tube hook.
17f. Mk.V respirator case sling adjustment buckles.
17g. Mk.V respirator case sling. Cut to length required.
17h. Mk.V respirator case retaining whipcord. Use with #17d.
18. P37 bayonet frog No.1 for Mk.III Lee Enfield (SMLE). Fold frog back on itself at position of red dotted line, so that it loops around the P37 waist belt.
18b. P37 bayonet frog scabbard securing stud.
18c. P37 bayonet frog retaining loop.
18d. P37 bayonet frog scabbard securing loops.
19. Shoulder straps for battledress.





'Happy Modelling'

Kitsworld Team
Stock code: KW3D135005

 


Decal Placement Guide

Decal Placement Guide Part 2


KW3D135005-KW3D135006-KW3D135007-1

KW3D135005-KW3D135006-KW3D135007-2

KW3D135005-KW3D135006-KW3D135007-3

KW3D135005-KW3D135006-KW3D135007-4

KW3D135005-KW3D135006-KW3D135007-5

KW3D135005-KW3D135006-KW3D135007-6

KW3D135005-KW3D135006-KW3D135007-7


Please click thumbs to expand
Related items

Kitsworld Kitsworld -1:35 British Military
Click to enlarge
Kitsworld -1:35 British Military
  £14.99

KW3D135006 P37 Pattern Blanco No.97 Khaki Green (Bren & SMLE).
British Army Webbing - P37 Pattern Blanco No.97 Khaki Green (Bren & SMLE).

KW3D135005, KW3D135006, KW3D135007- British Army Personal Equipment- Enlisted men & other ranks

** Note that straps have deliberately been made over length to allow for the differences in component dimensions in various kits and figure sets. It is recommended that a thin piece of masking tape is used in order to ascertain the required length of items marked 'cut to'. It is also recommended to study reference photographs closely to note the position of each item.

1. P37 web belt- cut to length required at non-buckled end.
1b. P37 web belt sizing hooks.
1c. P37 web belt sizing hooks.
1d. P37 web belt closing buckles.
1e. P37 web belt strengthening loops.
1f. P37 web belt web attachment straps.
2. P37 shoulder straps. Cut to length required.
2b. P37 shoulder strap brass ends.
3. P37 Lee Enfield (SMLE) sling. Cut to length required.
3b. P37 Lee Enfield (SMLE) sling attachment buckles.
4. P37 basic pouch- outer face.
4b. P37 basic pouch- inner face.
4c. P37 basic pouch- mounting strap.
5. P37 small haversack- outer face. Attach to smooth face of #5b.
5b. P37 small haversack- inner face. Attach to smooth face of #5.
5c. P37 small haversack- web attachment straps.
5d. P37 small haversack- auxiliary side and lower straps.
6. P37 pouch for .38 or .455 pistol ammunition- inner face. Attach to smooth face of #6b.
6b. P37 pouch for .38 or .455 pistol ammunition- outer face. Attach to smooth face of #6.
7. P37 pouches for .303 ammunition- outer face. Attach to smooth face of #7b.
7b. P37 pouches for .303 ammunition- inner face. Attach to smooth face of #7.
7c. Attachment buckle for P37 .303 ammunition pouches.
8. P37 'L' strap (vertical strap)- for large and small haversack- right side. Cut to length required.
8b. P37 'L' strap (vertical strap)- for large and small haversack- left side. Cut to length required.
8c. P37 'L' strap (vertical strap) adjustment buckle.
8d. P37 'L' strap (horizontal strap). Cut to length required.
8e. P37 'L' strap (horizontal strap) end piece.
9. P37 entrenching tool holder- outer face. Attach to smooth face of #9b.
9b. P37 entrenching tool holder- inner face. Attach to smooth face of #9.
9c. P37 entrenching tool helve attachment straps. Loop around helve.
9d. P37 entrenching tool helve attachment strap.
9e. P37 entrenching tool holder web mounting straps.
10. Mk.I/Mk.II 'Brodie' helmet sacking cover.
11. P37 brace attachments- one-piece gate.
11b. P37 brace attachments- hinged gate.
12. Mk.VI respirator case- outer face. Attach to smooth face of #12b.
12b. Mk.VI respirator case- inner face. Attach to smooth face of #12.
12c. Mk.VI respirator case- sling attachments.
12d. Mk.VI respirator case sling. Cut to length required.
12e. Mk.VI respirator case sling adjustment buckles.
12f. Mk.VI respirator case sling adjustment buckles with eye to attach breather tube hook.
13. P37 large haversack- outer face. Attach to smooth face of #13b. Note that only two of these are included as they were rarely carried.
13b. P37 large haversack- inner face. Attach to smooth face of #13.
13c. P37 large haversack web attachment straps.
13d. P37 large haversack underside attachment straps.
14. P37 canteen shoulder sling. Cut to length required.
14b. P37 canteen carrying strap. Cut to length required.
14c. P37 canteen shoulder sling to carrying strap buckles.
14d. P37 canteen securing strap (vertical). Cut to length required.
14e. P37 canteen securing strap (horizontal). Cut to length required.
15. British Army other rank insignia- NCO's: Lance-Corporal, Corporal, Sergeant, Staff/Colour Sergeant, Warrant Officer Class 2 (WO2), Warrant Officer Class 1 (WO1).
16. Chin straps for Mk.I/Mk.II 'Brodie' helmet (open). Cut each strap to length required.
16b. Chin strap for Mk.I/Mk.II 'Brodie' helmet (closed). Cut to length required.
17. Mk.V respirator case- outer face. Attach to smooth face of #17b.
17b. Mk.V respirator case inner face. Attach to smooth face of #17.
17c. Mk.V respirator case sling attachments.
17d. Mk.V respirator case retaining whipcord attachment loops. Use with #17h.
17e. Mk.V respirator case sling adjustment buckles with eye to attach breather tube hook.
17f. Mk.V respirator case sling adjustment buckles.
17g. Mk.V respirator case sling. Cut to length required.
17h. Mk.V respirator case retaining whipcord. Use with #17d.
18. P37 bayonet frog No.1 for Mk.III Lee Enfield (SMLE). Fold frog back on itself at position of red dotted line, so that it loops around the P37 waist belt.
18b. P37 bayonet frog scabbard securing stud.
18c. P37 bayonet frog retaining loop.
18d. P37 bayonet frog scabbard securing loops.
19. Shoulder straps for battledress.





'Happy Modelling'

Kitsworld Team
Stock code: KW3D135006

 


Decal Placement Guide

Decal Placement Guide Part 2


KW3D135005-KW3D135006-KW3D135007-1

KW3D135005-KW3D135006-KW3D135007-2

KW3D135005-KW3D135006-KW3D135007-3

KW3D135005-KW3D135006-KW3D135007-4

KW3D135005-KW3D135006-KW3D135007-5

KW3D135005-KW3D135006-KW3D135007-6

KW3D135005-KW3D135006-KW3D135007-7


Please click thumbs to expand
Related items

Kitsworld Kitsworld -1:35 British Military
Click to enlarge
Kitsworld -1:35 British Military
  £14.99

KW3D135007 British Army Webbing – P37 Pattern Blanco KG.3 Khaki Green (Dark) (Bren & SMLE).
British Army Webbing - P37 Pattern Blanco KG.3 Khaki Green (Dark) (Bren & SMLE).

KW3D135005, KW3D135006, KW3D135007- British Army Personal Equipment- Enlisted men & other ranks

** Note that straps have deliberately been made over length to allow for the differences in component dimensions in various kits and figure sets. It is recommended that a thin piece of masking tape is used in order to ascertain the required length of items marked 'cut to'. It is also recommended to study reference photographs closely to note the position of each item.

1. P37 web belt- cut to length required at non-buckled end.
1b. P37 web belt sizing hooks.
1c. P37 web belt sizing hooks.
1d. P37 web belt closing buckles.
1e. P37 web belt strengthening loops.
1f. P37 web belt web attachment straps.
2. P37 shoulder straps. Cut to length required.
2b. P37 shoulder strap brass ends.
3. P37 Lee Enfield (SMLE) sling. Cut to length required.
3b. P37 Lee Enfield (SMLE) sling attachment buckles.
4. P37 basic pouch- outer face.
4b. P37 basic pouch- inner face.
4c. P37 basic pouch- mounting strap.
5. P37 small haversack- outer face. Attach to smooth face of #5b.
5b. P37 small haversack- inner face. Attach to smooth face of #5.
5c. P37 small haversack- web attachment straps.
5d. P37 small haversack- auxiliary side and lower straps.
6. P37 pouch for .38 or .455 pistol ammunition- inner face. Attach to smooth face of #6b.
6b. P37 pouch for .38 or .455 pistol ammunition- outer face. Attach to smooth face of #6.
7. P37 pouches for .303 ammunition- outer face. Attach to smooth face of #7b.
7b. P37 pouches for .303 ammunition- inner face. Attach to smooth face of #7.
7c. Attachment buckle for P37 .303 ammunition pouches.
8. P37 'L' strap (vertical strap)- for large and small haversack- right side. Cut to length required.
8b. P37 'L' strap (vertical strap)- for large and small haversack- left side. Cut to length required.
8c. P37 'L' strap (vertical strap) adjustment buckle.
8d. P37 'L' strap (horizontal strap). Cut to length required.
8e. P37 'L' strap (horizontal strap) end piece.
9. P37 entrenching tool holder- outer face. Attach to smooth face of #9b.
9b. P37 entrenching tool holder- inner face. Attach to smooth face of #9.
9c. P37 entrenching tool helve attachment straps. Loop around helve.
9d. P37 entrenching tool helve attachment strap.
9e. P37 entrenching tool holder web mounting straps.
10. Mk.I/Mk.II 'Brodie' helmet sacking cover.
11. P37 brace attachments- one-piece gate.
11b. P37 brace attachments- hinged gate.
12. Mk.VI respirator case- outer face. Attach to smooth face of #12b.
12b. Mk.VI respirator case- inner face. Attach to smooth face of #12.
12c. Mk.VI respirator case- sling attachments.
12d. Mk.VI respirator case sling. Cut to length required.
12e. Mk.VI respirator case sling adjustment buckles.
12f. Mk.VI respirator case sling adjustment buckles with eye to attach breather tube hook.
13. P37 large haversack- outer face. Attach to smooth face of #13b. Note that only two of these are included as they were rarely carried.
13b. P37 large haversack- inner face. Attach to smooth face of #13.
13c. P37 large haversack web attachment straps.
13d. P37 large haversack underside attachment straps.
14. P37 canteen shoulder sling. Cut to length required.
14b. P37 canteen carrying strap. Cut to length required.
14c. P37 canteen shoulder sling to carrying strap buckles.
14d. P37 canteen securing strap (vertical). Cut to length required.
14e. P37 canteen securing strap (horizontal). Cut to length required.
15. British Army other rank insignia- NCO's: Lance-Corporal, Corporal, Sergeant, Staff/Colour Sergeant, Warrant Officer Class 2 (WO2), Warrant Officer Class 1 (WO1).
16. Chin straps for Mk.I/Mk.II 'Brodie' helmet (open). Cut each strap to length required.
16b. Chin strap for Mk.I/Mk.II 'Brodie' helmet (closed). Cut to length required.
17. Mk.V respirator case- outer face. Attach to smooth face of #17b.
17b. Mk.V respirator case inner face. Attach to smooth face of #17.
17c. Mk.V respirator case sling attachments.
17d. Mk.V respirator case retaining whipcord attachment loops. Use with #17h.
17e. Mk.V respirator case sling adjustment buckles with eye to attach breather tube hook.
17f. Mk.V respirator case sling adjustment buckles.
17g. Mk.V respirator case sling. Cut to length required.
17h. Mk.V respirator case retaining whipcord. Use with #17d.
18. P37 bayonet frog No.1 for Mk.III Lee Enfield (SMLE). Fold frog back on itself at position of red dotted line, so that it loops around the P37 waist belt.
18b. P37 bayonet frog scabbard securing stud.
18c. P37 bayonet frog retaining loop.
18d. P37 bayonet frog scabbard securing loops.
19. Shoulder straps for battledress.





'Happy Modelling'

Kitsworld Team
Stock code: KW3D135007

 


Decal Placement Guide

Decal Placement Guide Part 2


KW3D135005-KW3D135006-KW3D135007-1

KW3D135005-KW3D135006-KW3D135007-2

KW3D135005-KW3D135006-KW3D135007-3

KW3D135005-KW3D135006-KW3D135007-4

KW3D135005-KW3D135006-KW3D135007-5

KW3D135005-KW3D135006-KW3D135007-6

KW3D135005-KW3D135006-KW3D135007-7


Please click thumbs to expand
Related items

    
     About Us       All Products       Terms and Conditions       Privacy Policy       Design Services       Testimonials       Contact Us       Latest Releases       New Releases
     © Kitsworld 2008 - 2022